Am I able to use it without relicensing on my 2019 Ascent? Well I won it got it home went to start the process of unmarrying it through Cobb only to find out they don't support that version anymore. } I am selling my Subaru Accessport V3 (AP3-SUB-004) and intake, if I have never opened the box, does that mean its all good to go? Unfortunately, a lot of people will be selfish and sell the car without the AP but leave parts on the car that need tuning. I recently sold my 2007 Legacy GT and didnt have a chance to uninstall AP (AP3-SUB-003) because it was a last minute trade (I basically moved my stuff to a new car and went on my way) If I wanted to sell it to someone else with the same year LGT what would be the cost for them to unmarry? Can you Unmarry a Cobb Accessport without the car? Second you need to find the car that you want to unmarry it from. Answer 2: After the uninstall process is completed the Cobb Accessport will no longer be recognized by the cars computer. The Accessport will need to be mailed to our HQ for the conversion to take place. The Accessport will only allow you to install the correct map specific to your ECU. Food. He needs an AP3-FOR-001 (total cost new is $625). } im looking at a v3 cobb accessport that is a sub 003 and i would want to switch it to a sub 001 how much would that cost? Do I need to uninstall the Cobb Accessport before I trade it in? Which uses another part number AP3-POR-006. v3 Hi good days, I have a COBB accessport V3 in my car and tuned by a COBB ProTuner, and he is no longer do the custom tune job, now I am going to find another to dyno tune my mazda 3 MPS but he said I need to get a licence first, what should I do if I need a retune by a different person? Once you have the serial number youll need to contact COBB customer support and provide them with the number. How long does the Cobb Accessport uninstall process take? } @media screen and (min-width: 769px) and (max-width: 992px) { Is there a way that I can un-marry the AP without the car, or restore the AP back to original state? [emailprotected]. Once these documents are in hand, you can then go to your local Road Administration Office (Dopravn Inspektort) and present them along with your proof of ownership to register the vehicle. Now comes the tricky part even though these steps are generally straightforward for most devices running Windows operating systems, there are nuances for both Mac OS X and Linux users as well as some other sources citing alternative methods so if in doubt visit our tech support page here at CLM Motorsports or contact us directly. All information published on this website is provided in good faith and for general use only. However, youll only be able to use it on one vehicle at a time. } Hopefully this guide can saveyou making an overly costly purchase. } Hey Dan, unfortunately the Accessport you purchased for a 2013 WRX (SUB-003) is not the same part number that youll need for your 2017 WRX (SUB-004). Answer 7: The Cobb Accessport uninstall process takes a few seconds to complete. The first step is to download and install accessport manager on your mac or pc. It would be a huge disservice to pass the car on to a customer in its current state. Assuming it was uninstalled from the previous vehicle, the cost would be $150. When it comes to Accessports, married and installed are synonyms. If you have a Cobb Accessport and you want to unmarry it from your car there are a few things that you need to do. Give our Customer Service team a shout at 1-866-922-3059 or [emailprotected] and well help you figure out the most effective way to get your WRX tuned! We recommend to protect yourself by confirming the installed state in person or, at the very least, feel the seller out. Is there a way to unmarry it without the car, so i can use it for my 2016 fiesta st. This isnt the only cost to consider when buying used. After that you need to click on the Uninstall button. 02-05 WRX vehicles require an initialization connector to be flashed and are available for $5. Is there a way I can use the USDM AP and somehow by way of miracle, can make it work? Once you have the code youll need to enter it into the Accessport manager software. What are my options. If i buy a used stage 1 cobb package with accessport and intake will it work for my car if the guy says he unmarried it from his car?I have 16 wrx. You will be prompted to turn the ignition 'On' but do not. We are able to reprogram it to the part number compatible with the later cars. Once you know what part number you need,pry up on the faceplate of the Accessport youre considering buying and make sure it corresponds to your part number. With the vehicle turned on but not running scroll down to the "Troubleshooting" Menu. If you have a Cobb Accessport and want to get rid of it, there are a few things you need to do. Typically, Cobb charges prices ranging from $50 $100 USD. Lets take a look at a couple of examples of purchasing used Accessports: Jared owns a 2013 WRX. .jaspr6403186c7b4e6 { How would I go about doing that and what are the associated costs? Look at the On Accessport instructions at the link below. $472.50? Overall, it is not possible for an individual without access or possession of a car flashed with a COBB Accessport unit being able unmarry said unit without necessarily accessing the actual vehicle associated with said flashed unit. Will I lose any data or settings after I uninstall the Cobb Accessport? Luckily, its pretty easy to determine which Accessport part number you need. The short answer to the question is yes, you can disconnect your Accessport from your car without running a tune. However, with some patience and diligence, you can restore your Accessport back to its original settings without having a vehicle at hand. Please email [emailprotected] and include documentation from your insurance report regarding the total loss of the vehicle and they will quote you on the exact price and service process to relicense the Accessport. The Accessport has a feature called ECU flashing that requires the engine control unit (ECU) of the vehicle to be connected and communicating with the Accessport in order for it to complete its functions. Confirm this by highlighting [OK] and pressing. All Rights Reserved. It will recognize the vehicle and give you the appropriate OTS map selection (this is all assuming it is on the current firmware. Since the Accessport is still installed to the Evo X Mark would have the cost of the re-license in this case 36750 AND the cost of changing the. What do I need to do to make it work? To check if your AccessPORT is installed, scan the list of programs in the Programs and Features menu in your computers settings. That price can vary somewhat depending on whether the unit has PDK flashing ability or not and if you want to have the PDK option on the 006. If youre simply going to a different COBB Protuner, theyll just use their copy of Accesstuner Pro to create a custom calibration for your car. Other accessories include the start guide, different faceplates, a protective case, and a dashmount and holster. .nrfsm64031852acb45 { Once you have found all of these things you need to follow the instructions on how to unmarry the Cobb Accessport from your car. You would need to have it relicensed. To start the process, give us a call at 866-922-3059 or email [emailprotected]. Save my name, email, and website in this browser for the next time I comment. Does this mean this AP only has STI maps? .jaspr6403186c7b4e6 { The FOR-001 Accessport is $550. Subaru Accessport V3 (AP3-SUB-004) The Accessport is the world's best selling, most flexible, and easiest to use ECU upgrade solution for your Subaru. It's important that during this process all variables used fall within their specified preprogrammed range so make sure any customization done prior has been completely reversed before attempting this procedure otherwise serious engine damage may occur from out of limit settings in place during restoration attempts. We are able to "relicense" a unit that is still installed on a stolen or wrecked car but we do need to see 1. A police report stating the car is wrecked or stolen or an insurance claim stating the car was wrecked or stolen. Assuming it was uninstalled, the cost would be $150. If you've been using an Accessport, you know that it comes with several pre-configured profiles for different vehicle types. The price for the conversion varies depending on what car it is for. 2023 MasterCard Fully Funded African Scholarships at University of California, Berkeley, 2023 The Bartlett Promise Sub-Saharan Africa Scholarship at University College London UK, 2023 MasterCard African Scholarships at University of California, Berkeley, How To Remove The Maxi Cosi Car Seat From Base, Proudly powered by Newspack by Automattic. display: block; Any action you take based on the information found on cgaa.org is strictly at your discretion. Yes, it is in need of a relicense. If the modifications are outside the scope of the off the shelf maps, custom tuning would be required. Believe it or not, you can reset your Cobb Accessport to factory settings without actually needing the car. Most of us also have the same hurdle when it comes to reaching that or any other car goal that requires modifications. Answer 3: The Cobb Accessport is removed from the cars computer through the uninstall process. They will help set up a service ticket and quote your final price. Since the Accessport isInstalledand theincorrect part number, Mark will have the following costs: InstalledANDWrong Part Number Same Value: Drew owns a 2002 Subaru WRX. I have a 2014 focus st got a used ap unmarried got a tune from jst and when I load it to the ap it says its locked to the 2015 focus st. This is typically readily available on forums or Ebay which may be a better alternative to craigslist. The car may run OK for a while but it's basically a ticking time bomb. The cost to relicense the Accessport would be $325. Cobb can unmarry an AP for $325, so add that to what people charge for used married APs and there isn't usually much value there. .nrfsm64031852acb45 { According to the article above, the cost to relicense an Accessport is 70% of the unit cost. Those are the only two different labels. 675 * .7 = $472.50. Not all is lost if you purchase a used Accessport that is installed to another vehicle or the wrong part number. Since the Accessport isuninstalledand thecorrect part numberhe can simply install the Accessport and go! Shoot our Customer Service Team an email ([emailprotected]) or phone call (866-922-3059) and well get you taken care of. After you install the Accessport to your car, uninstall will be an option. Yes, it is in need of a relicense. } We can reprogram that unit for you, but there will be fees involved and, depending on what you paid for that Accessport, it may be more cost effective to sell and purchase the correct part number. We can not guarantee its completeness or reliability so please use caution. Ive been using an AP3-SUB-004, and today I restored the factory settings on the WRX via the AP so it just displays Install when connected to the car. Yes, it is in need of a relicense. If you can't say it with numbers, it's only an opinion. Hey Kevin, the current cost to relicense is 50% of the retail value of the Accessport. Amore importantthing to consider is the Accessports part number. To revert your Cobb AccessPORT to stock settings, first select the 'Uninstall/Revert' option from the main menu. As the article mentions, the cost to change part numbers is $150 plus the difference in the price of the Accessport. There are no major differences between the two. I am looking at a married AP3-MAZ-002 for my mazdaspeed 6. The Accessport has a feature called ECU flashing that requires the engine control unit (ECU) of the vehicle to be connected and communicating with the Accessport in order for it to complete its functions. Just make sure to update the firmware using Accessport Manager to make sure youre all up to date. @media screen and (min-width: 769px) and (max-width: 992px) { or can it be done online or some authorized locations around Toronto, Canada? It will run horribly if much at all with the stock map. If this doesnt work or you need any help, give us a call at 866-922-3059. You can also customize and save your own profiles for specific vehicles. i have a married accessport for a 04 sti. It is a physical change that would require sending in the ECU. Will I be able to register the accessport? Give them the AccessPort for two reasons. If Uninstall is an option, this Accessport will not work on your vehicle until it is uninstalled from the previous vehicle or sent to COBB to be re-licensed. Answer 6: The steps to uninstall the Cobb Accessport are as follows: go into the settings menu and find the uninstall option. When i uploaded a 2019 map into the accessport using the accessport manager it showed me a warning that the car model in which on which the accessport was installed doesnt match even though the website says AP3-SUB-004 is compatible with all subaru models from 2015-2019. how much does this cost?! Luckily, all supported Evo Xs use the same Accessport part number. The cost to re-license the AP will be half of that cost. Answer: Yes youll just need to contact Cobb support for help. Im trading in my car. } In order for that to happen, you will need to contact our support team and set up a service ticket. The Fora platform includes forum software by XenForo. They started out with trade in value at 11,000 and jeep at 8888. Is it possible to unmarry my Cobb accessport without the car? Part#: AP3-POR-007, used origianlly on a Cayman Gt4. @media screen and (min-width: 1201px) { https://www.cobbtuning.com/support/step-by-step-firmware-update-instructions/, https://cobbtuning.atlassian.net/wiki/spaces/PRS/pages/98843715/Map+Notes+for+2005-2006+Legacy+GT+and+2005-2006+Outback+XT, https://cobbtuning.atlassian.net/wiki/spaces/PRS/pages/832405527/Accessport+Identification+and+Serial+Number+Location. Dec 15, 2009. The only option is to send it to us to have it "relicensed." However, we charge $395 to perform this service unless you have a police report or insurance claim stating that your AccessPORT equipped vehicle is a complete loss or stolen along with your proof of purchase. Answer 8: There is no preparation needed before uninstalling the Cobb Accessport. I purchased a used accessport thinking it was unmarried, however, both the seller and myself were mistaken. @media screen and (max-width: 767px) { I had a buddy total his car. thanx. You shouldnt! It sounds like the Accessport may still be installed to the previous vehicle. However, sometimes it becomes necessary to reset the Accessport to its factory settings without getting access to an actual carbut how? If you can prove it's a total loss (pix obviously show that), they will unmarry it for $40 I believe. Hey all, just picked up a 02 WRX that was supposedly returned to stock. The Subaru AccessPort is a handheld tuning device used to remap and tune a Subaru engine's ECU for improved performance. How can I do that? It also provides increased airflow from the Big SF Intake & Airbox combo. It should work. CGAA will not be liable for any losses and/or damages incurred with the use of the information provided. However, this leaves a car with a "locked" ECU that cannot be read out by or re-written SSM or ECUflash. Yes. In this case, $437.50 to relicense the Ford AP. Hi guys, I have a Subaru WRX 2006 but I live in Australia.. You need the cob to talk to the ECU I think. And unregistered? I love cars and I love writing about them Answer 6: The steps to uninstall the Cobb Accessport are as follows: go into the settings menu and find the uninstall option. The maps would only work on your GTI if both ECU IDs match exactly. Yes. It can easily be replaced with any micro USB > USB cable. 675 * .7 = $472.50. Cobb can unmarry your accessport for about 300 you need to ship the accessport back and they will reset the AP so it can be married to another car. When did the writing on front top of accessPort change from accessPort to cobb? Just wanted to do some research before I think about buying it. Cobb can unmarry your accessport for about $300, you need to ship the accessport back and they will reset the AP so it can be married to another car. Is the switch doable ? so I wrecked my 14 and have a 19 never unmarried the wax now I have the ap and my sti but no way to unmarried and cobb hasn't answered me in two weeks consider my self s.o.l ? It sounds like the Accessport is still installed to the STI. @media screen and (min-width: 1201px) { Also, does it matter if it goes from a sedan to a wagon? Are there any hardware revisions differences to be concerned with the older production units? How do you check the codes on a Cobb Accessport? To register a vehicle to a new owner, you will need the title of the vehicle, a completed ownership transfer form, and payment for applicable fees. The cost for a relicense on that Accessport would be $472.50. This is far less common but is something to be conscious of. What would be the process for this, is it a physical change that Cobb need to make, or is it something that is done remotely. You can confirm this using the details outlined in the installed state section above. I am looking at buying an ap2-sub-003 (unmarried) and would need to have it relicensed to sub-002. Fourth you need to find the Cobb Accessport firmware. so if I get a sub004 thats unmarried, whats the cost for me to get a access port for my mk6 gti? } Supposedly anyone with Unmarried/free accessport can connect to my ECU, marry it, and then unmarry/uninstall and then the access port and my ECU are allowed to . However, with an Accessport, its not uncommon to see people that were trying to save a buck end up spending a lot more than they should have. Why Would You Want To Unmarry A Cobb Accessport Without The Car? @media screen and (min-width: 993px) and (max-width: 1200px) { Please email [emailprotected] with all the information regarding your Accessport and the vehicles. He needs AP3-MIT-002 ($525 new). .jfhqs64031852aca31 { [emailprotected]. Apr 7, 2018. .jfhqs64031852aca31 { He buys aninstalled Accessport for a 2015 Subaru STI (AP3-SUB-004 $725 new). The cost of a SUB-004 Accessport is $675. Save my name, email, and website in this browser for the next time I comment. I dont have my car can I still unmarry my Cobb accessport? Give our Customer Service team a shout at 1-866-922-3059 or [emailprotected] if youd like to get that process started. .jaspr6403186c7b4e6 { Re:Another hack attack! What would I be looking at on price to use it for my 2013 Focus ST? Go to the dealer and tell them that yu mistakenly left the car's ECU tuned for some modifications that you removed prior to selling it to them. We do offer the ability to change part numbers on the V3 Accessport. However, paying for these remediescan quickly outweigh the savings for buying used in the first place. display: block; Your email address will not be published. 70% of that is $472.50 which would be the cost to relicense that part number Accessport. This can usually be accomplished using their dedicated laptop app or an online web browser program such as OpenFlash Manager or EcuTek Lite. You are looking for a SUB-003 unit, so verify that the serial number starts with SUB03. Hi Bill! } What would be the fee to get it relicensed? The installed state is just as important as whether or not the Accessport is the correct part number. Next select "Read from Device". Overall, it is possible for you to remove your Accessport without running a tune but doing so has risks associated with it which could affect both its performance capability in another vehicle or adversely impact the internal hardware of said other vehicle depending upon various factors outlined above hence we advise exercising caution while making decision here accordingly. You are able to register it. looking forward to a response, thanks. So if the person wants to get an Accessport anyway, they might as well go ahead. Required fields are marked *. Cause the part number is the same. He buys anuninstalled Accessport (AP3-NIS-007) from a 2016 Nissan GT-R (total cost new is $975). I just trade-in my Limited. 0-60 faster then your first sexual experience. Please the Select button quickly after turning the Ignition 'On". Second, if you plan on re-installing your Accessport in a different vehicle at any point after removing it from yours then running a tune is highly recommended for performance reasons as each ECUs settings will need to be adjusted accordingly for optimal performance results based on various factors such as engine type and environment etc.. Additionally, taking these steps before installation also ensures that errors or false run tests dont occur due to incorrect settings which could damage sensitive hardware in long run if left unaddressed. I purchased an unmarried, non installed unit thats for an ecoboost for-003 and I own a 2017 fiesta st so I need the unit to be configured to for-001. Hello, thanks for contacting us. I bought an AP for my WRX two weeks ago and a week later I had a wreck and totaled my car. car if we could. I will be using the the COBB on my 2014 Porsche Carrera Turbo. Check out the article above for details on how to determine which part number Accessport you have. Do I need to uninstall my current one first? How would I go about getting it unmarried? Its been uninstalled correctly. Unfortunately, if you have a tune that has overwritten the Accessport install (which is what it sounds like) you will not be able to uninstall the Accessport. @media screen and (min-width: 768px) and (max-width: 768px) { You can also find other great tips online from forums and automotive communities who are willing to share their experiences dealing with similar issues. I see a-lot of different labeling and dont want to purchase something that might be the wrong item. If not, I will be selling it at 3/4 the cost so is it worth it for someone to buy it if there is a fee? display: block; In the US? In most states you can complete these steps at your local Department of Motor Vehicles office. It allowed me to install and tune the vehicle with OTS maps, but the option for Uninstall is available; does that mean it is not functioning properly? display: block; The following is a basic guide that includes the things to consider whenbuying a used Accessport. 70% of that amount is $455. Click "OK" when prompted to confirm that you wish to uninstall the selected map file. Note Two Exceptions to the Accessport Part Number Shown Above: 1 Accessport Activates or APAs. How Does Newton'S Second Law Apply To A Car Crash. But what if you want to delete a configured Accessport profile without a vehicle? Check out this blog post above for all the details. From there select the desired option. Nick owns a 2017 Focus ST. Cobb Tuning Accessport V3 Help Menu Tutorial Youtube . Please contact [emailprotected] to request to have the Accessport converted to the appropriate part number. so youre telling me I have to buy 2 accessports? Do I need the car? does the ecu lock after a cobb tune? I contacted COBB and they want $475 to relicense it so i could use it on my RS. Answer 14: Yes you should uninstall the Cobb Accessport before trading in your car. I bought an un-married V3 AP from a ford focus RS, to use on my 2013 Ford Fusion 2.0 ecoboost. First, download and install Accessport Manager. First, make sure you have the latest firmware version of the Accessport downloaded on your computer. The first thing that you need to do is to connect the Cobb Accessport to your computer. I have a 2017 wrx and my wife just got a 17 Forester. He needs AP3-MAZ-002 ($675 new). 2 Accessport V3s are able to be reprogrammed to a different part number. Hey Jason, in that case you would need a new Accessport and would have to overwrite the tune that is currently on the ECU in order to install. Please tell me Im not going to have to pay another $350 to get it re-licensed. NBA. How to unmarry cobb accessport. Just remember - once deleted there's no going back so ensure that it is unneeded before committing.. If it is already installed (or "married") to another vehicle, it will not work on your vehicle. If I buy an Accessport married to a 2004 wrx, can I put it on a 2004 wrx? Hi I had my AP uninstalled from my previous WRX, SUB0311905. As mentioned above, the cost to relicense an Accessport is 70% of the cost of the unit. Answer 9: No you will not lose any data or settings after uninstalling the Cobb Accessport. Will I be able to reinstall it later if I change my mind? I want to unmarry my Cobb accessport. There is a $150 fee plus the difference in Accessport cost. .jaspr6403186c7b4e6 { Now open up ATR software on computer by clicking on "Load Supported Vehicle" tab in top menu bar. Hi, Ive bought an accessport, for my MY16 STI ADM and the part number is AP3-AU-SUB-004, however the serial number is SUB1400397. Hey Kyle, says it needs to be relicensed bc he sold his last wrx, so is that the $150? I bought a used access port and the owner did not uninstall. I didnt do the uninstall procedure from my old car. As long as you have documentation of the total loss we are able to give you a break on the relicensing fee.
Airbnb Phoenix Heated Pool,
Amelia Santaniello Daughter,
Northwell Health Talent Acquisition Contact,
How Much Is The Us Open Tennis Trophy Worth,
How Many State Pensioners In Uk,
Articles H